![]() |
![]() |
![]() |
![]() |
Home |
![]() |
About |
![]() |
News |
![]() |
Contacts |
![]() |
Support![]() |
![]() |
Product![]() |
![]() |
Site Map |
![]() |
||||||
![]() |
||||||
![]() |
|
![]() |
DMX Dimmer Pack DP-121 |
||||
![]() |
![]() |
||||
![]() |
DMX Dimmer Pack DP-121 is intended to control the power(brightness) of light devices via USITT DMX-512 protocol. 3-pin XLR connectors are used to commutate the connections.
The device is designed at rigid metal case in accordance with REC 3U standard (132mm). Cooling air flow is pointed from left to right sides of the device.The dimmer allows
to control the power(brightness) at 6 channels independently with the 220V AC. The dimmer has multiple additional features: soft regulation or on/off mode for each channel. Also, it is possible to set minimal and maximal power level for each channel independently. Devices are powered with three-phase AC with 220V between 0 and phase wire. Two output channels are connected to each input phase. The dimmer keeps working even in case one or two input phases turn off – the channels on the third phase remain working. There are different protection systems at the dimmer: Intellectual fan cooling system, short circuit protection system for each channel, overheat protection system. The parameters of the device are set via the menu and displayed at alphanumeric universal indicator. |
![]() |
![]() |
![]() |
Specifications: |
||
![]() |
||
Control Amount channels Indication and selection of modes Minimum channel current Maximum channel current Channel protection actuation current Optoelectronic isolation of DMX signal Setting any DMX address for each channel Individual settings for each channel Short circuit protection system for each channel Overheating protection system Cooling RFI filtering system Spiral ringing elimination system Lamp protection system (SoftStart) Ability to work with inductive loads Supply voltage Overall dimensions, mm Weight |
- DMX-512 - 12 - alphanumeric display 2 lines of 16 characters - 0,05A less than 11W - 5A (1.1 kW) - 8A (in consultation with the customer) - + - + - + - + - + - forced, intellectual - + - + - + - + - main: 4-wire network 3 phases, 230 V between neutral and phase wires. Additional: two or single-phase switching 230 V. - 484х274х132 - 11 kg |
|
![]() |
||
![]() |
![]() |
![]() |
![]() |
![]() |
Overall dimensions |
Please note |
Additional materials |
|||||||||||||
![]() |
|||||||||||||||
|
Power Line |
||||||||||||
![]() |
||||||||||||
|
||||||||||||
|
||||||||||||
![]() ![]() |
||||||||||||
![]() |
||||||||||||
Copyright(c)
1997-2021. All rights reserved. Web-design and development by |
![]() |
![]() |
![]() |